Blog
NHR-03 Rotor Head from JR
JR still making NHR-03 rotor head. But NHR-02 and NHR01 are discontinued.
The difference between NHR-02 and NHR-03 is very different.
NHR-02 is swing rotor head. NHR-03 is the picture.
Also, the screw size for main shaft is different.
NHR-03= 4mm / NHR-02=3mm
NHR-03 Rotor head is 4mm bolt to fasten between the center hub and 10mm main shaft.
The linkage is already including.
We believe NHR-03 is much safety and better rotor head.
JR 84026 NHR-03 Rotor Head
Japanese F3C Pilot - 10S or 12S
Well, a lot of pilots like TP6600-5SPL2. But, some pilots like TP5500-6PSL2.
So, it seems to depend on the pilot for the battery (10S and 12S).
We noticed higher discharge ability is not so good for the F3C pilot.
45C or 30C battery is not so good. The power drops suddenly.
20C or 25C battery provides a more stable power supply for longer.
DSMJ or DSM2 - Which should I choose?
| Japanese / European Version | DSMJ system |
| USA version | DSM/ DSM2 system. |
| European Version | DSM2 |
DSMJ system will only work DSMJ receiver and TX.
DSM/ DSM2 system will only work DSM/DSM2 receiver and TX.
So, This mean , DSMJ and DSM are different and are not compatible.
The reason why the regulation for 2.4Ghz different is each country has different law for 2.4Ghz.
USA version is too strong in Japan or Europe.
You can think of DSM2 USA and DSM2 Europe as brothers. Virtually the same, just the frequency is a little stronger in the USA.
The 11X Zero by JR Propo
Available.
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
Basic SPEC
System: DSMJ/Computer Mixing
Channel: 11Ch
TX weight: 840g (Except module/Battery)
Battery: 8N1500(Ni-MH)
Frequency -1024
A Charger is included.
JR Servo Compatibility List USA/Japan
We get a lot of orders for JR servos using the Item numbers from the USA.
So we thought in order to help you understand better about the international servo system between JR Japan and the USA, we have published this list.
Please view this list.
Gyro GY520 compatible with JR DS8900G
Is gyro GY520 compatible with a servo JR DS8900g safely (used in mode 1 of the gyro but they are very hot after a flight with gy 520 and g7000t too!)
The rudder servo will be really hot with GY520 or G7000. This is why 8900G servo using heat sink case. This is probably normal.
About GY520's servo mode, Please choose the digital(1520).
Odaiba, Tokyo Trade Show
K&S and JR had the booth at Inazuma Festival 2009 in Odaiba Tokyo .
This is not a usual trade show. Because, the concept of the event was American Casual Fasion.
The RC products were displayed as one of fashion.
Muffler for YS56SR and OS55HZ
The Hatori #566 - 56NS-3D is good for both.
The difference between: YS91SR3C and YS91SR?
91SR3C
Displacement : 14.88 cc
Bore: 27.0 mm
Stroke: 26.0 mm
Weight: 560g
91SR
Displacement : 14.88 cc
Bore: 27.0 mm
Stroke: 26.0 mm
Weight: 533g
The difference between 91SR3C and 91SR is
KS 1117 Swash Plate Leveling Gauge - Instructions
This is useful for the Voyager E.
The point is you will see the horizontal and the parallel for your swashplate and main shaft.
-----
SWASH PLATE LEVELING GAUGE
Thank you for purchasing this K&S product.
Please read the instructions carefully before beginning to use.
Swash Plate Leveling Gauge CNC machined from aluminum.
Mount to the main mast to check if the swashplate is in the correct position therefore allow an exact linkage connection possible to be realize.
Magnet is used to allow the Swash Plate Leveling Gauge mount to the main mast very easily.
