Blog
The 11X Zero by JR Propo
Available.
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
Basic SPEC
System: DSMJ/Computer Mixing
Channel: 11Ch
TX weight: 840g (Except module/Battery)
Battery: 8N1500(Ni-MH)
Frequency -1024
A Charger is included.
JR Servo Compatibility List USA/Japan
We get a lot of orders for JR servos using the Item numbers from the USA.
So we thought in order to help you understand better about the international servo system between JR Japan and the USA, we have published this list.
Please view this list.
Gyro GY520 compatible with JR DS8900G
Is gyro GY520 compatible with a servo JR DS8900g safely (used in mode 1 of the gyro but they are very hot after a flight with gy 520 and g7000t too!)
The rudder servo will be really hot with GY520 or G7000. This is why 8900G servo using heat sink case. This is probably normal.
About GY520's servo mode, Please choose the digital(1520).
Odaiba, Tokyo Trade Show
K&S and JR had the booth at Inazuma Festival 2009 in Odaiba Tokyo .
This is not a usual trade show. Because, the concept of the event was American Casual Fasion.
The RC products were displayed as one of fashion.
Muffler for YS56SR and OS55HZ
The Hatori #566 - 56NS-3D is good for both.
The difference between: YS91SR3C and YS91SR?
91SR3C
Displacement : 14.88 cc
Bore: 27.0 mm
Stroke: 26.0 mm
Weight: 560g
91SR
Displacement : 14.88 cc
Bore: 27.0 mm
Stroke: 26.0 mm
Weight: 533g
The difference between 91SR3C and 91SR is
KS 1117 Swash Plate Leveling Gauge - Instructions
This is useful for the Voyager E.
The point is you will see the horizontal and the parallel for your swashplate and main shaft.
-----
SWASH PLATE LEVELING GAUGE
Thank you for purchasing this K&S product.
Please read the instructions carefully before beginning to use.
Swash Plate Leveling Gauge CNC machined from aluminum.
Mount to the main mast to check if the swashplate is in the correct position therefore allow an exact linkage connection possible to be realize.
Magnet is used to allow the Swash Plate Leveling Gauge mount to the main mast very easily.
KS727.2 Tail Blades - Length
K&S 727.2 Tail blade
Lenght 85mm (from grip hole)
KS1147 Clutch Shoe - Diameter
Diameter: 37.8mm
One-way hole diameter: 6mm
When will the OS55 HZ be available?
This is available from end of August 2009.
